Coldforest Ripper Gray anti-thermal imaging kit

Description The Coldforest Ripper Gray anti-thermal imaging kit is designed to reduce visibility in thermal imaging devices and is used at night during personnel rotations, ambushes, assault/reconnaissance operations, or when it is necessary to move from closed positions to open terrain at night. The product reduces visibility in thermal imaging devices by blocking and scattering the heat generated by the body. It works by destroying infrared waves, while not affecting the energy emitted by a person or the actual temperature of the product. The product is visually perceived by thermal imaging devices as cold, thereby effectively masking the user. It does not require additional padding, withstands direct contact with the body and heat sources heated to 70°C. The cloak can be worn on bare skin during the day and at night. Composition Cape with hood, mask, and seasonal camouflage, gloves (Finnish type), shoe covers with high gaiters Characteristics Operating time: over 8 hours. Weight: 450 g (acceptable deviation 100 g) Operating distance: 1 m and longer Noisy – makes soft sounds when rubbed. How to use Be sure to put on a helmet, then put on the hood and mask, and then cut out the eye holes. Next, tuck the mask inside the suit. The rest of the clothing worn or not worn under the raincoat does not matter for the effectiveness of the suit. In case of excessive heating (e.g., due to explosions/fires, etc.), after a certain time, the temperature of the cloak will normalize to the ambient temperature without removing it. Warning When used in rain at temperatures below 5°C, the product is less effective. Cloak care Can be hand washed in water up to 40°C without adding aggressive detergents. Dry in the open air.